oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if115.0m-18a 115.0 mhz if saw filter 18.45 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if115.0m-18a january 2011 rev a 115.0 mhz if saw filter 18.45 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1 = 18 nh, l2 = 27 nh output l3 = 18 nh, l4 = 27 nh source/load impedance 50 ?
oscilent part number 835-if115.0m-18a january 2011 rev a 115.0 mhz if saw filter 18.45 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -20 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 114.9 115.0 115.1 insertion loss at fo db - 29.5 32.0 group delay variation nsec - 45 80 absolute delay at fo usec - 4.37 - passband ripple variation db - 0.6 1.0 bandwidth at -1db mhz 18.40 18.45 - bandwidth at -3db mhz 18.60 18.65 - bandwidth at -40db mhz - 19.50 19.60 bandwidth at -50db mhz - 19.60 19.75 ultimate rejection db 50 55 - temperature coefficient ppm/c - -18 -
oscilent part number 835-if115.0m-18a january 2011 rev a 115.0 mhz if saw filter 18.45 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db bandwidth at ?50.0 db
oscilent part number 835-if115.0m-18a january 2011 rev a 115.0 mhz if saw filter 18.45 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation group delay variation smith chart
oscilent part number 835-if115.0m-18a january 2011 rev a 115.0 mhz if saw filter 18.45 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|